| HP 230 LTO Ultrium Tape Drive |
| Capacity |
100 GB (200 GB per cartridge at 108 GB/hour with 2:1 comp) |
| Recording Technology |
8-channel linear serpentine recording on half-inch media |
| Media Compatibility |
LTO Ultrium1 (609 m ± 1m Metal Particle (MP++) formulation with 4K Cartridge Memory) |
| Interface |
Type: Wide Ultra2 SCSI (LVDS)
SCSI Connector:
Internal: 68-pin LVDS
External: 68-pin HD LVDS
Array module: 80-pin SCA (SCSI and power) |
| Sustained Transfer Rate |
15 MB/sec native (30 MB/s with 2:1 compression) |
| Burst Transfer Rate |
160 MB/s (with Ultra3 SCSI wide) |
| MTBF |
250,000 hours at 100% duty cycle |
| Form Factor |
5¼ inch full-height |
Dimensions (H x W x D)
Internal
Rackmount
External |
3.25 X 5.75 X 8.0 in (8.3 x 14.6 x 20.3 cm)
6.3 x 3.4 x 11.9 in (16.1 x 8.7 x 30.3 cm)
4.8 x 8.2 x 11.7 in (12.2 x 20.8 x 29.8 cm) |
Weight
Internal
Rackmount
External |
4.2 lb (1.9 kg)
7.9 lb (3.6 kg)
11.7 lb (5.3 kg) |
Power Requirements
Internal
Rackmount
External |
+5V @ 5.2A (typical)
+5V @ 6.3A (max)
+12V @ 0.7A (typical)
+12V @ 2.75A (max)
+5V @ 5.2A (typical)
+5V @ 6.3A (max)
+12V @ 0.7A (typical)
+12V @ 2.75A (max)
100-240 VAC, 50/60Hz (auto-ranging)
0.7A max
Power connection IEC 320 |
| Power Consumption |
Min 20W (idle)
Max 32 W (writing) |
